You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
You are viewing the article in preview mode. It is not live at the moment.
Home > Infrastructure > Network > Logging into VPN
Logging into VPN
print icon

 

The application to access the VPN is called FortiClient.  It should already be setup to connect to Otis College's servers. If it is not already setup, please open a ticket with the help desk or view "Configuring FortiClient VPN" in the HappyFox Knowledgebase (https://helpdesk.otis.edu/kb/article/121-configuring-forticlient-vpn/).

If you are already setup with VPN, please continue using it as you have been up to this point, there are no changes.

 

If you are new to VPN usage, you will need a FortiToken issued by IT (please request it from the Help Desk if you haven't already). Once setup, you will receive an email with the information needed to set it up. Please follow the instruction below under VPN FortiToken Setup.

Once setup, it will generate 6 digit codes that will be used to login to the VPN.

 

To connect, open the FortiClient app on your laptop (or desktop), which should look similar to this:

 

You should then be presented with this screen:

 

Enter your normal credentials (for email/computer/etc), and press Connect.  After a few moments, it will then prompt you for the FortiToken code:

 

Enter the code from the FortiToken app on your phone.

It will then run for a few more moments, and once connected, the main screen show:

 

Once connected, you should have access to the network to access internal resources like you do while on campus.

If any services aren't working while on VPN, please open a ticket with the Help Desk.

 

VPN FortiToken Setup

FortiToken Mobile - User Instructions

FortiToken Mobile is an OATH compliant, event-based and time-based one-time password (OTP) generator application for mobile devices. FortiToken Mobile produces its OTP codes in an application that you can download to your Android or iOS mobile device without the need for a physical token.

FortiToken Mobile allows you to install Fortinet tokens as well as third-party tokens, including tokens for two-factor authentication used by Dropbox, Google Authenticator, Amazon, Facebook, Microsoft, Yahoo, Snapchat, PayPal, eBay, and LastPass.

Go to the Google Play store to download the free FortiToken Mobile application for Android.

Go to the Apple App Store to download the free FortiToken Mobile application for iOS.

If you do not have a iOS or Android device to use, please let us know via a ticket, and we will find an alternative for you.

Token Activation

After your system administrator assigns your token, you will receive a notification with an activation code and an activation expiration date by which you must activate your token. Depending on which option your system administrator has chosen, you will receive the activation notification either by email.

If you do not activate your token by the indicated expiration date (about 24 hours from when it is sent), you must contact the help desk ([email protected]) so that your token can be reassigned for activation.

Activating your FortiToken Mobile token

note icon Please note that the following instructions were captured using an Apple iPhone. Certain words/phrases, visuals, and procedures may vary depending on what device and/or OS your FortiToken Mobile application is running on.
  1. On your device, open the FortiToken Mobile application.

    If this is the first time opening the application, you will be prompted to create a PIN that will be used for secure access to your application and tokens.

 

note icon If your mobile device is Touch ID protected, this (or a new PIN code) can be configured in the Info section of the application later.
  1. In the top-right corner, select the add-symbol ( + ). Your device's camera will show in order for you to scan the token's QR barcode; this is attached in your email notification.
    Once scanned, continue to step 3.
  

If you received your notification via SMS, select Enter Manually to enter the token's activation key manually:

  • Select Fortinet or Other to add the token as a third-party token.
  • Enter your email address in the Name field, and enter the activation key in the Key field. When ready, select Done.
 
  1. Once the barcode has been scanned or the key has been manually entered, your token will become provisioned and activated, and start generating token codes immediately.
    If you would like to view the OTP's digits, select the eye-icon.

Third-party Token Activation

The steps for activating a third-party token, such as those used for Google Authenticator, are the same as for Fortinet token, except make sure to select Other when entering the key manually. Depending on the token vendor, you may be able to alternatively use the barcode scanner to activate the token.

Generating OTPs

Upon entering the application and entering your PIN or passing Scan ID, your token will be visible in the home screen. The 6-digit OTP will be displayed, each lasting for 30 seconds, after which a new OTP code is generated.

If you have multiple tokens installed, they will all be listed on the home screen.

Using FortiToken Mobile tokens

  1. Open the application and enter your PIN/Scan ID to get to the home screen where your tokens are displayed.
  1. You can copy the OTP to clipboard by pressing and holding on the OTP code and selecting Copy. This can be done even if the OTP is blocked from view.
    If you would like to view the OTP's digits, select the eye-icon.
  1. Go to where you need to present your token's OTP, such as the FortiClient VPN client, enter the OTP where required, and log in to pass the two-factor authentication process.
Feedback
0 out of 0 found this helpful

scroll to top icon